• FlowDrive AC Drive for Wastewater Management Applications

Emotron NEMA 1 Drive for Wastewater Mgmt.

20HP AC Drive, 460V, 3 Phase - FLD48-030-20

$1,617.00

Quantity

Details

The Emotron FlowDrive is specifically developed for controlling waste water pumping stations. It continuously adapts motor speed to the level required, minimizing energy consumption and wear.

Key Features

  • Available as a robust and certified NEMA 12 / IP54 metal construction or NEMA 1 / IP20 version.
  • Fully automatic waste water reservoir level control.
  • Best Efficiency Point (BEP) calculation for optimal energy saving operation.
  • Efficiency is increased by using built-in cleaning functions; pump cleaning, sump cleaning, pipe cleaning.
  • All drive sizes are delivered with built-in Category C3 EMC-filter as standard. Cat C2 as option.
  • Coated board as standard.
  • Temp/Speed controlled fans assures less noise, a more even drive temperature and higher efficiency.
  • Detachable multi-language control panel included as standard. The following languages are supported in the control panel: English, Swedish, Dutch, German, French, Spanish, Russian, Italian, Czech, and Turkish.
  • Removable control panel with own memory means it is easy to transfer or copy settings.
  • UL/cUL, (UL 840) approved.

 

 

 

Product Series/Model # FLD48-030-20
Input Voltage 3 x 460V
Output 3-Phase Output
Horsepower 20HP
Enclosure Rating NEMA 1 / IP20
Weight (lbs.) 37.4
Dimensions (H x W x D) 17.2 x 6.9 x 10.5 in.
Frame Size C2
Approvals CE, EAC, UL/cUL

 

 

 

A number of options let you customize the Emotron FlowDrive functionality and fully utilize the product according to your needs. Options can be added to your shopping cart at the top of this page.

 

RS232/RS485RS232/RS485 Isolated - Isolated RS232/RS485 serial communication board. For Modbus/RTU communication protocol. Baud rates: 2400 - 38400 bits/s supported. Typical drive response time = 10 ms (not including any ethernet delays). Part no. 01-3876-12

 

ProfibusFieldbus - Profibus - option module for Profibus DP or DP V1 communication. Use 9-pin D-sub connector. Baud rates: 9.6 kbits/s - 12 Mbits/s supported. Typical drive response time = 10 ms (not including any fieldbus delays). Part no. 01-3876-05

 

DeviceNetFieldbus - DeviceNet - option module for DeviceNet communication. Baud rates: 125 - 500 kbits/s supported. Typical drive response time = 10 ms (not including any fieldbus delays). Part no. 01-3875-05

 

Profinet, 1 PortEthernet - Profinet IO 1-PortIndustrial Ethernet option module for Profinet IO (RT) protocol. RJ45 type connector. Baud rate: 100 Mbits/s. Typical drive response time = 10 ms (not including any ethernet delays). Part no. 01-3876-11

 

Profinet, 2-PortEthernet - Profinet IO 2-port - Industrial Ethernet option module for Profinet IO (RT) protocol. 2 x RJ45 type connectors. Baud rate: 100 Mbits/s. Typical drive response time = 10 ms (not including any ethernet delays). Part no. 01-3876-12

 

Modbus TCPEthernet - Modbus/TCP - Industrial Ethernet option module for Modbus/TCP protocol. RJ45 type connector. Baud rates: 10 or 100 Mbits/s supported. Typical drive response time = 10 ms (not including any ethernet delays). Part no. 01-3876-09

 

EthercatEthernet - EtherCAT® - Industrial Ethernet option module for EtherCAT protocol. 2 x RJ45 type connectors (IN and OUT). Baud rate: 100 Mbits/s. Typical drive response time = 10 ms (not including any ethernet delays). Part no. 01-3876-10

 

External Control PanelControl Panel Kit, including control panel - External control panel IP54 suitable for mounting on a panel door. This option is to be used in combination with an AC drive module ordered with a blank control panel.

 

 

Control Panel Kit, including blank panelControl Panel Kit, including blank panel - External control panel IP54 suitable for mounting on a cabinet door. This option is to be used in combination with an AC drive module ordered with a built-in control panel.

 

 

HCP 2.0Handheld Control Panel HCP 2.0 - Handheld control panel with full functionality. Easy to connect to the AC drive for temporary use during e.g. commissioning and service. The HCP 2.0 enables setting of parameters and viewing of actual values and fault logger. It also offers the possibility to copy parameter data from one AC drive to other AC drives. Part no. 01-5039-00 (complete with cable).

 

Search our store